www.ledidea.com * speci cations subject to change without notice. dimensions are in mm0.25 unless stated otherwise. idea, inc., 1351 titan way, brea, ca 92821 ph:714-525-3302, 800-led-idea; fax: 714-525-3304 2005g t -1, (3-mm) round, quad pcb mount led indicator, G245B series G245B is designed to extend the reach of the led indicators into the front bezel area where the pcb edge remains a distance awa y. the four lamps are positioned on a 0.3" pitch. the foot print of the pin-out is the same as the g244b but the lamps are center ed 0.25" above the mounting plane and the lamps are signi cantly more forward. specify part desired as follows: G245B/order code led1 + order code led 2 + order code led 3 + order code led 4 f or example: ?G245B/i+y+2g? designates an assembly with a red led, a yellow led and 2 green led's from left to right order code and information (all ratings at 25c ambient) led lamp typical characteristics recom. op. if (ma) epoxy & type color order code p eak vf (v) iv (mcd) 2 1/2 (nm) @if=20ma @if=10ma (deg) tinted diffused resistor required hi eff red i 635 2.0 10 60 10-20 green g 565 2.1 10 60 10-20 y ellow y 585 2.0 10 60 10-20 orange o 610 2.0 10 60 10-20 tinted transparent high brightness hi eff red it 635 2.0 40 40 10-20 green gt 565 2.1 40 40 10-20 y ellow yt 585 2.0 40 40 10-20 tinted diffused f or 2ma operation hi eff red i2 635 2.0 1.0 @ 2ma 60 2-10 green g2 565 2.1 1.0 @ 2ma 60 2-10 y ellow y2 585 2.0 1.0 @ 2ma 60 2-10 tinted diffused 5v operation hi eff red i5 635 - 10 60 5 v green g5 565 - 10 60 5 v y ellow y5 585 - 10 60 5 v white diffused bipolar, bicolor red/green eg 635/565 2.0/2.1 4 / 4 90 10-20 y ellow/green yg 585/565 2.0/2.1 4 / 4 90 10-20 red/yellow ey 635/585 2.0/2.0 4 / 4 90 10-20 (typ for bi-color) green anode red or yellow anode + ? (pinout for single color) 19.1(.75) 20.3(.80) 3.5(.13 ) 2.5(.10) 7.62(.30) 15.24(.60 ) anode typ 8.6(.34) 27.6(1.09) ?1.0(0.04) 2 pls 6.4(.25)
|
